Hello to Kevin and the group.
Still another amplifier question: In my case I have a great Micor
Repeater and I have a need to increase the output of the exciter to
either 3-5 watts or 5-10 watts to drive some commercial amplifiers
that operate in that INPUT range. I am wondering what is the best
way to get that kind of drive, from the existing 400-500 Mw Drive I
have from the Micor Exciter.
Also has anyone had any experience with the PagePro Exciter by Sonix
Tech. in CA? This is a synthesized 1.5 ppm Paging Exciter Model DPM-
150-SX. I have been told the output is adjustable up to about six
watts. Any comments about using one of these for repeater use? They
are VHF in the 150.XXX Paging Freq. and MAY program to the 2-meter
band.
As always thanks for sharing your experience and advice.
73 JIM KA2AJH
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
