Had the same exact thing happen on a Motorla Mitrek setup, asked the guys here, they said turn up the power a little so the internal TX RX filters would work better. Cranked it up from 25 to 30W and it did the trick.
I have heard the GE's are just a finicky. Scott NA4IT --- In [email protected], "Dennis Carpenter" <[EMAIL PROTECTED]> wrote: > > I have a Mastr II VHF mobile conversion w/Link rlc1+ controller, > preamp at the duplexer and ts64 decoder board. All has worked well > fer a few years now. Recently there has been a steady tone (squeel) > around 1000hz heard on the repeater. It as all problems comes and > goes. It at first could be heard only when a carrier was being > rec'd. When the rec'd signal dropped so did the tone. Nothing heard > on tx hangtime. > This morning though it remained on after the rec'd signal dropped, > all the way until the R > rptr TX dropped. It would happen this morning about 50% of the time. > This was first time we've heard it in a few days. > Any ideas what to look fer first?? Thought the trouble was the > rec'vr but after this morning not to sure. > > As always thanks in advance, > > Dennis ki5fw > Lauderdale Repeater group w5LRG > 444.500 w5LRG/R > 146.970 ki5fw/R pl100hz > Lauderdale county, MS > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
