Can you recall where you saw the article and/or did you keep notes of the component values for the VHF and UHF caps, coils, etc. Would like to duplicate you efforts if possible. Thanks
Doug N3DAB at arrl dot net for direct contact --- In [email protected], "Jim Cicirello" <[EMAIL PROTECTED]> wrote: > > A while back there was an excellent article on making these Z Matchers. I > made two, one VHF, One UHF, they worked well. The only parts were two Piston > Caps, One turn coil between the caps and it was put in an RF tight box with > two RF connectors of your choice. On the home made ones there was no circuit > for the voltmeter. Does anyone know how this voltage is obtained from the Z > Matcher? I would like to incorporate this design so I can remove the Power > Meter and make a final tune. > > > > 73 JIM KA2AJH > > > > _____ > > From: [email protected] > [mailto:[EMAIL PROTECTED] On Behalf Of John J. Riddell > Sent: Tuesday, January 24, 2006 11:48 AM > To: [email protected] > Subject: [Repeater-Builder] Z matcher info.pdf > > > > Here is the "How to" sheet on the Z matcher. > > > > John VE3AMZ > > > Z matcher info.pdf > > > > > > > > > _____ > > YAHOO! GROUPS LINKS > > > > * Visit your group "Repeater-Builder > <http://groups.yahoo.com/group/Repeater-Builder> " on the web. > > * To unsubscribe from this group, send an email to: > [EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED] subject=Unsubscribe> > > * Your use of Yahoo! Groups is subject to the Yahoo! > <http://docs.yahoo.com/info/terms/> Terms of Service. > > > > _____ > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
