At 1/24/2006 10:54 AM, you wrote:
>Fellows,
>
>I bought these cans at Dayton last year. I have no information on them.
>The interconnecting harness is butchered pretty badly, so I'm not sure of
>the correct lengths. I'm hoping that someone can recognize these and has
>some documentation and / or a set that we can use as a pattern.
>
>I think these are Sinclair, but I'm not sure.
My vote is for Sinclair also.
> Kevin and I have put them on the tracking generator and have been able
> to get LPHR response out of them, but not HPLR. I think this is due to
> not having the correct cable lengths.
Just a guess, but try adding a near-1/4 wavelength of coax between the T &
can connector. I once turned a pass cavity into a pass-notch that
way. Perhaps the 1/4 wavelength will transform the LPHR into HPLR? Also
are you getting decent specs out of the current LPHR response (~40 dB
notch, 0.7 dB pass loss)?
>
>Thanks in advance for any info and to you dial-up subscribers, sorry for
>sending pictures you may not need.
Actually they're very small: 4.8 & 6.2 kB. Even dialup users will DL them
in no time. JPG is a wonderful format when used properly.
Bob NO6B
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
