I missed it, can you make the plans available, with or without the volt meter mod? Mike
Jim Cicirello wrote: > A while back there was an excellent article on making these Z Matchers. > I made two, one VHF, One UHF, they worked well. The only parts were two > Piston Caps, One turn coil between the caps and it was put in an RF > tight box with two RF connectors of your choice. On the home made ones > there was no circuit for the voltmeter. Does anyone know how this > voltage is obtained from the Z Matcher? I would like to incorporate this > design so I can remove the Power Meter and make a final tune. > > > > 73 JIM KA2AJH > > > > ------------------------------------------------------------------------ > > From: [email protected] > [mailto:[EMAIL PROTECTED] On Behalf Of John J. Riddell > Sent: Tuesday, January 24, 2006 11:48 AM > To: [email protected] > Subject: [Repeater-Builder] Z matcher info.pdf > > > > Here is the "How to" sheet on the Z matcher. > > > > John VE3AMZ > > > Z matcher info.pdf > > > > > > > > ------------------------------------------------------------------------ > YAHOO! GROUPS LINKS > > * Visit your group "Repeater-Builder > <http://groups.yahoo.com/group/Repeater-Builder>" on the web. > > * To unsubscribe from this group, send an email to: > [EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]> > > * Your use of Yahoo! Groups is subject to the Yahoo! Terms of > Service <http://docs.yahoo.com/info/terms/>. > > > ------------------------------------------------------------------------ > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
