Re: [Repeater-Builder] Mystery 2M cans

[Kevin Berlen, K9HX]

These definetly are from a Sinclair hybird-ring duplexer. The coaxial
style notch tuning cap attached to the tee was salvaged from the hybird
ring phasing harness. I believe these are single mode cavities. I have
two of them tuned as notches to keep a local paging TX from interfering
with a 2-meter repeater. I can come up with the Sinclair model number of
the duplxer tomorrow if that would help.  73,
Kevin, K9HX
At 01:54 PM 1/24/2006, you wrote:

Fellows, 
 
I bought these cans at Dayton last year. I have
no information on them. The interconnecting harness is butchered pretty
badly, so I'm not sure of the correct lengths. I'm hoping that someone
can recognize these and has some documentation and / or a set that we can
use as a pattern.
 
I think these are Sinclair, but I'm not sure.
Kevin and I have put them on the tracking generator and have been able to
get LPHR response out of them, but not HPLR. I think this is due to not
having the correct cable lengths.
 
Thanks in advance for any info and to you
dial-up subscribers, sorry for sending pictures you may not need.
 
Scott Zimmerman
Repeater-Builder (the company)
 
Scott Zimmerman
Amateur Radio Call N3XCC
612 Barnett Rd
Boswell, PA 15531





YAHOO! GROUPS LINKS 

 Visit your group
"
Repeater-Builder" on the web.
  
 To unsubscribe from this group, send an email to:

 
[EMAIL PROTECTED]
  
 Your use of Yahoo! Groups is subject to the
Yahoo! Terms of
Service. 

















  




  
  
  YAHOO! GROUPS LINKS



   Visit your group "Repeater-Builder" on the web. 
   To unsubscribe from this group, send an email to: [EMAIL PROTECTED] 
   Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.