At 2/3/2006 19:17, you wrote:
>--- In Repeater-Builder@yahoogroups.com, "Coy Hilton" <[EMAIL PROTECTED]>
>wrote:
> >
> > IF you want the best goto "www.advancedreceiver.com"
>
>
>Good amps certainly, but the best amp is the one that suits your system
>the best.
>
>A typical complaint is that the sensitivity of the system actually
>decreases when the amp is in line, because it also amplifies
>interfering signals which then saturate the receiver's front end.
I'm not up on Vertexes, but I thought their stock sensitivity was already
pretty good. I do know that their front-end selectivity is non-existent,
as someone once put one in service at a local comm. site with no filtering
& it got completely destroyed by IMD. One pass cavity on the RX cleaned it
right up. No preamp before or after.
Bob NO6B
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
