Paul Finch wrote:
>Kevin,
>
>OK, I understand now. I have (in a past life) worked as a RF engineer but
>don't have any of the equipment available to me. This is a Johnson Fleetcom
>II 530 radio I am trying to modify. Everything so far has moved to 224 MHz
>OK except these micro strips, it like it hits a brick wall. I will read the
>part about the Japanese PA Module.
>
>What can I say, I am a different kind of guy, I have plenty of these radios
>so I thought I would at least try one.
>
>Will keep the Builder informed on how it comes out.
>
If the transistors used by Johnson have a FT of greater than 224 MHz,
you might have good luck!
Let us know how you make out...
Kevin
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
