For what it's worth, I used RF Parts for a pair of PA transistors that I needed for another project. They were prompt in their delivery, and the transistors worked flawlessly... The PA was rated at 5 in - 90 out before I did the switch (although it was only 45 out, that's why the rebuild) and when I got done, it was 5 in - 110 out. Only other change was to switch a couple of caps to bring the operating freq down a bit...
Mark - N9WYS -----Original Message----- DCFluX wrote: > RF parts has a good selection of parts in stock, but their shipping > leaves a little to be desired. > > On 2/13/06, [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>* > <[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>> wrote: > > I need to buy a replacement for a MRFXXX device I blew up over the > weekend. I know RF Parts has these, but have no experience with them. > > Is there any other place you guys have used that you would recommend? > > Roger > W5RD > > Roger White > Murphy, Texas Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
