I beleive the problem the Gentleman is having with his Micor repeater
Pa is in the Tripler. These are repairable but your going to need to
do some RF circuit tracing. You should get about a watt out of this
unit. If you are not seeing that then you need to look further back.
The PA will not work with much less than a Watt. If you are going to
check the PA be very carefull not to exceed a 1.5 watts. Now after you
do get this working if this is the problem you need to be very
carefull about having a load on the output. It has been my experience
that you can damage the unit (tripler) with out a load being on the
tripler or the PA. You can also see this Web site's documentation on
the Tripler. RF parts carries the replace transistors for the Tripler.
Hope this helps
Mike
W1ZFB
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
