Mike Morris wrote:

> At 06:09 AM 2/17/06, you wrote:
> 
> 
>>I suppose I should brave the cold and go out to the garage and dig out
>>the GLB 300 I have...it was set up for an MHT series Motrac. I ran it
>>for years on a Motran. I don't remember if the I.F. in the H series rx
>>was the same...8Mhz...
>>I think I have the book too...
> 
> 
> HHT early series was 12mhz, around the C or D version they went to 8.6MHz
> Last version was the E series.
> LHT and MHT series was all 8.6Mhz

Huh-the Motran I had was 8.0 Mhz. And the book agreed...hmmm.

I remember because, in order to get a reasonable amount of bandwidth out 
of the rx, I took out the preselector and put in a hamtronics preamp 
w/helicals. I found that even with that, I could dial up 146.40 and hear 
the NWS on 162.40 just fine-16 Mhz away.
-- 
Jim Barbour
WD8CHL





 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
    [EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



Reply via email to