Steve, You must enter the CW ID characters one at a time.
Example: key in "pppp2A18" - controller responds with CW "OK", then key in "pppp2D36" - controller responds with CW "OK", etc... remembering that the last character must be keyed as "ppppnnFF" - where "nn" is the next memory location after the last CW character programmed. Check out the NHRC-4 programming information generator at: http://www.nhrc.net/nhrc-4/nhrc4prog.php This is a great tool to assist in programming the controller. Regards, Rich / N1LTL --- In [email protected], "steve" <[EMAIL PROTECTED]> wrote: > > Hi > > not really feasable as I live in Liverpool UK. > I did email them a few days ago, but no reply, so far. > A point you maybe able to answer. When I program in > the CW ID from a mobile with dtmf mic, do I release the > key in between ie, pppp2A18, pppp2D36 etc > > Thanks > > > Steve > ----- Original Message ----- > From: <[EMAIL PROTECTED]> > To: <[email protected]> > Cc: "steve" <[EMAIL PROTECTED]> > Sent: Tuesday, February 21, 2006 12:04 AM > Subject: Re: [Repeater-Builder] Re: NHRC-4 Controler > > > > I suggest that you call NHRC, they are available weekday evenings to talk > to a live person. Check their web page for times. I just spoke to him last > week about a question on the NHRC-4M2 and he was very helpful. > > > > 73, Joe, K1ike > > > > ---- steve <[EMAIL PROTECTED]> wrote: > > > Hi Mike > > > > > > I have tried a small amp on the contrroller tx A/F feed, can't hear > > > anything, maybe the level insn't enough. When the CW id > > > and programming OK tone is sent I take it the TX led should > > > come on, on mine it dosn't. I have mailed NHRC but they take > > > their time answering > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > -- > > No virus found in this incoming message. > > Checked by AVG Free Edition. > > Version: 7.1.375 / Virus Database: 267.15.11/264 - Release Date: 17/02/06 > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
