Hi yes I have heard from NHRC and am getting help, so what does V3 do if it don't use hex. I have init OK and have changed the passcode, yes I realise about the FF using the # key and the * for E Biggest problem I think is me not using a suitable amp on the tx a/f as a monitor. Will sort that right away. Thanks for the help
73 Steve ----- Original Message ----- From: "Joe" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Tuesday, February 21, 2006 1:02 AM Subject: Re: [Repeater-Builder] Re: NHRC-4 Controller > I haven't programmed my new NHRC4 MII yet. I've got the new software chip > for mine, Version 3, and it does not use the hex code programming format. > > Did you follow the instructions in the manual? It calls for an > initialization procedure, followed by entering the access code. Then you > enable the controller. Then you enter the codes as you described > (releasing the key after each character). After each character, you should > hear "OK" after the character programmed. You must end the programming > with an End-of-Message command. > > At the beginning of the CW ID, I usually add a few space characters to add > a little delay before the ID starts. There is an NHRC-4 Programming > Information Generator at: > http://www.nhrc.net/nhrc-4/nhrc4prog.php > that might be helpful. > > 73, Joe, K1ike > > At 12:32 AM 2/21/2006 +0000, you wrote: > >Hi > > > >not really feasable as I live in Liverpool UK. > >I did email them a few days ago, but no reply, so far. > >A point you maybe able to answer. When I program in > >the CW ID from a mobile with dtmf mic, do I release the > >key in between ie, pppp2A18, pppp2D36 etc > > > >Thanks > > > > > >Steve > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > -- > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.1.375 / Virus Database: 267.15.11/264 - Release Date: 17/02/06 > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
