First, can someone tell me in the F/D tuning of the MSF5000, they say
to adjust for a dip in the RF Millivolt meter, which I can get, and
then says to go a half turn past that, on the dip, does it go to the
bottom of the dip and remain there, or where should it come back up
to. This is very unclear to me.
My problem is, I'm still getting double beeps from the repeater,
stating that there is a mismatch with the PA. I can manually key the
transmitter with the xmit switch on the repeater, get about 55 watts
out, but the repeater will not key up. The controller is keying he PA
exciter, just not the amplifier stage.
Mathew
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
