Tuesday, February 28, 2006 6:20 PM
Subject: Re: [MotorolaR100Repeater] Fw: [Repeater-Builder] motorola r100
rptr
> The hang-time on a R100 is determined by JU12 and resistors R922, R923 and
> R924. All these parts are found on the Control Board which is in the lid
> of the repeater.
>
> 2 sec hang-time would mean JU12 is out. R922 and R923 out. R924 (27K)in.
>
> Hopefully your Control Board is silkscreened so you can find these
> locations.
>
>
> Good Luck!!
> Randy
>
>
>
>> >
>> >
>> >> hello
>> >> i have a uhf25watt r 100 motorola repeater which has been set up
>> >> for no repeater tail at end of transmitting.
>> >> i want to put it back to the original 2 second default setup
>> >> could someone tell me the procedure involved on the controller
>> >> board as i see they soudered a few new electronic parts on it
>> >> thanks
>> >> tom
>> >
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
