At 03:20 PM 03/08/06, you wrote:
>Hello All
>
>I have a UHF Micor RT station that was a surplus 460 police
>repeater, single reciever, 75 watt PA. I am almost sure it was setup
>for DC control. Here is my generic questains. I have built quite a
>few repeaters but never a Micor. Of course I need to make sure the
>station will operate as-is before I convert it to Amateur use.
>I would like some suggestions for like backplane jumper placement,
>what stock cards to use, or just maybe some sort of logical plan of attack.
>For now, I do not have the tone remote, and I have the station
>control module, ( with all switches in defeat mode, and the 4-wire
>line driver cards installed. The most I am getting is weak audio
>that I cannot squelch from the reciever controls, but only with the
>line driver card installed. (I have a generic Moto speaker hooked to
>the pins on the backplane)
This is normal. Live with it.
Mike WA6ILQ
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
