I must have missed your earlier post. Thanks for the re-hash! Maybe tomorrow I wil get my buddy Chris to come over here with a network analyzer to see whazt the deal is.. My harnes is correct by your specs.
na6df wrote: > I have that same set. The folks who took over the decibel duplexer > division tell me that the cable lengths don't change. > Here is a copy and paste of my earlier posting: > > --Well, after a bunch of poking around, and calling DB/Allen > Telecom/Andrews, they directed me to the new company who handles the > old DB Products line of duplexers and such... > > It's now called "DBSpectra" www.dbspectra.com > > Phone: 469.322.0080 > > Fax: 469.322.0079 > > 1590 E. Hwy. 121 Bus. Bldg. A Lewisville TX 75056 > > I nice guy in the support department looked up the data on the DB4060 > for me and here's the scoop: > > He did say that there was some difference in the loops for the > different band segments, but all the cable lengths are the same for > any segment. > > Cables for the high pass side, including the one going to the tee are > 10" cut length (cable only length, not including connector). > On the low pass side, cable to tee is also 10" cut length, but cable > between cavities is 10.5", cut length. > > He did not elaborate on any differences in the loops. > > Enough "CSI Duplexer" for one day.. > > 73, > > dave na6df > - In [email protected], Jay Urish <[EMAIL PROTECTED]> wrote: > >>Does anybody have the formula for the harness on a Decibel DB-4060- > > WOC-C? > >>Its a 4 can VHF duplxer. It used to be up around 155Mhz and I need > > to > >>get it down to 145.23/144.63 >>It will tune the 145.23 but 144.630 just won't notch right. I > > suspect > >>the inter-cavity harness. >> >>Any help would be appreciated! >>-- >>Jay Urish W5GM >>DCARA President ARRL Life Member >>TXFCA President ERS Vice-Prez >>Denton County ARRL VEC >>N5ERS VP/Trustee >> >>Monitoring 1292.30Ghz PL-100.0 441.375 PL-88.5 and 444.850 > > PL-88.5 > > > > > > > > > > > Yahoo! Groups Links > > > > > > > -- Jay Urish Network Administrator Unixwolf Enterprises LLC. http://www.unixwolf.net 972.691.0125 972.965.6229 Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
