be careful, with a 2.4G system, you may have delay.
------ Original Message ------
Received: Sun, 19 Mar 2006 10:50:26 PM CST
From: DCFluX <[EMAIL PROTECTED]>
To: [email protected]
Subject: Re: [Repeater-Builder] Linking Suggestions Please
> Try a 2.4GHz wireless video sender, with coffee can antennas.
>
> On 3/19/06, Gary Pearce KN4AQ <[EMAIL PROTECTED]> wrote:
> >
> > If you have line-of-sight, maybe infra-red (or laser was already
suggested).
> >
> > 73,
> > Gary KN4AQ
> >
> > At 07:45 PM 3/19/2006, you wrote:
> > >Hi,
> > >Here's the deal. I have two sites...Site one is where my 440 hub
> > >repeater is located. Site two is where I'm planning to put a 220
> > >repeater. The distance between the two is about 20-30 yds.
> > >I need to find a way to link the two together. Doing it on 440 is out
> > >for several reasons. I could use 900 with a couple of GTX900s or
> > >similiar but that seems to be a total waste not to mention would cost
> > >$250-$300. Seems like there should be an alternative to spending that
> > >kind of money. I also need this to work without attracting a lot of
> > >attention, ie...putting up antennas outside. The radios would need to
> > >be able to do CTCSS or DCS.
> > >
> > >Someone suggested using telemetry radios. Anyone have any experience
> > >with those? Someone else said I might be able to do it with hts on low
> > >power. I have been thinking about 1.2 GHz but can't locate anything
> > >that would work.
> > >
> > >Your suggestions?
> > >
> > >Thanks
> > >Mike K4IJ
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >Yahoo! Groups Links
> > >
> > >
> > >
> > >
> >
> >
__________________________________________________________________________
> > Gary Pearce KN4AQ staff writer, SERA Repeater Journal
> > Cary, NC www.sera.org
> > 919-380-9944 [EMAIL PROTECTED]
> > [EMAIL PROTECTED]
> > AIM: KN4AQ Radio. Yahoo: KN4AQ
> > (send e-mail to be put on my "buddy list")
> >
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
