First off, Micor Base Station - doesn't have any of the required shield kits to make it into a repeater.
---- Original Message ---- From: [EMAIL PROTECTED] To: repeater-builder@yahoogroups.com Subject: RE: [Repeater-Builder] Can anyone identify this? Date: Sat, 18 Mar 2006 06:19:18 -0700 >Eric, > >Looks like T[IorL]X1555A stamped in the lower left corner of the >backplane. ?? TLN4666A Interconnect Board? >Also found TRD1803BB and TLN8747A? stamped on receiver frame on > back right side. TRD1803BB is a receiver model number - 150.8 - 162 MHz TLN8747A is a sub-chassis assembly number (I think.) >Power Suppy has TPN1110B on it. Micor base / repeater station Power Supply > >Here are two overall images of front and back ... > >http://www.rickster.org/pics/front.jpg > >http://www.rickster.org/pic/back.jpg The usual pictures ... >The flying leads in the back are connected to a phone patch unit that >will be removed. The system is currently working as a 'plain-jane' >repeater on 147.300 - 147.900 with a Wacom WP-641 duplexer ... ok ... > >Things are a wee bit slow around here this AM ... my T1 wireless >went down overnight and the backup dial-up connection sucks dead >gerbils! > >Thanks for the help guys! No problem ... > >73, >Rick AE7RS Neil - WA6KLA > >On 3/17/2006 8:33:06 PM, Eric Lemmon ([EMAIL PROTECTED]) wrote: > > Rick, > > > > Offhand, it looks like a 60 watt, intermittent duty base station. >If it > > were a repeater station, there should be shield plates covering >the > > receiver. It might also be a paging station. > > > > Look for any numbers stamped in black ink along the edges of the > > backplane > > and on the power supply or on any sheet metal parts. Any string of >three > > letters and four digits, usually starting with "T", are important. >Also > > look for any tag or label with a number of the form C53RTB3106A >(the > > letters > > and numbers may be different) which is the model number. Some >overall > > photos of the front and back will help a lot. > > > > 73, Eric Lemmon WB6FLY > > > > > > > > >Yahoo! Groups Links > > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/