Hi Jeff,
Jon sent me the following (thanks again Jon) :
[paste]
"vb" vapor block cables were developed by db about
1971--- if you have an old catalog they're addressed
in the engineering section
I believe they made at least three types, which are
still used by them today for their harnesses---
The velocity factor for all 3 is .66 polyethylene
dielectric, copper braid
vb 83 = 35 ohm
vb 8 = 50 ohm
vb 11 = 75 ohm
hope this info helps you
[end paste]
cheers,
skipp
> "Jeff DePolo" <[EMAIL PROTECTED]> wrote:
> I've only ever seen VB-83 (35 ohm, similiar to RG-83)
> and VB-8 (50 ohm, similar to RG-8).
> I have RG-83 cable available if anyone is looking
> for some to rebuild harnesses, but it's not cheap...
>
> > There are at least one or two other VB numbers.
> > Anyone have an idea what the other values are?
> > cheers,
> > skipp
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
