Sounds like a StationMaster or Super StationMaster or Heavy Duty model.
The radials should be a fixed length from the factory, but I don't have
a set handy to measure.
As for whether they should be angled or not, again, that should be set
from the factory - some models were angled and some were not. From
memory, the ones that went straight out were 'vertical' while the ones
that sloped were horizontal so they could be bent.
Joe M.
[EMAIL PROTECTED] wrote:
>
> I have a Phelps-Dodge VHF antenna about 21'10" long.
>
> Tell me about the three radials at the bottom.
> For the 2 meter band, what should the length be?
>
> The NCG GP-6 antennas use about 19.5" long radials.
>
> Should the radials be straight, like the GP-6, or angled down some degree(s)?
>
> What should the length of the radials be, for a UHF band antenna?
>
> 73's,
> Jim Kh6jkg.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
