Jay Urish wrote:
> Change your PL for a few days.. See what happens.
>
> Scott wrote:
>> Here's the problem...
>>
>> Every so often (several times in 10 minutes) we are getting a key up
>> of our repeater.
>>
>> Here is what we know...
>> There is no signal coming in on the input frequency. No even a small
>> spike. It is almost like something in the set up is timing and keying,
>> but it is not an exact interval. Doesn't matter is RX tone is enabled
>> in the CAT or not.
>>
>> Here is the setup...
>> Motorola Mitrek trunk mount on 443.275, CAT 250 controller, Com-Spec
>> TS64DS tone board. It has a good 300W 3 can duplexer that is tuned
>> correctly and working well. 75Amp power supply. The cabinet also has
>> an APRS rig in it, as well as a remote receiver for another repeater,
>> and a link radio, but NONE of that is even turned on (and doesn't make
>> a difference when it is).
>>
>> Suggestions as to what to look for...?
Make sure you are using COS *AND* PL. The decoder may be falsing on
random noise.
--
Jim Barbour
WD8CHL
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
