> One other query to put out. Does anyone have a couple of those > resistors that are in the splitter/combiner panel of a high power > Mastr 2 station? I found a spare panel for my repeater that I would > like to get going for just in case. I have the panel and the cabling > but one resistor is missing and the other is now cooked, well > done. If > not any suppliers of them or a good replacement? Thanks > > Andy KC2GOW
To save me a trip to storage, refresh my memory. Are the Wilkinson resistors soldered to the back of that little square perforated box, or do they have a mounting flange and attach to the box and rack plate with screws? If the former, I'm not sure where to get them. But they could probably be replaced fairly easily with a flange mount type instead. For flange mount types, try EMC thick-film resistors (http://www.emct.com/microwavepassivecomponents-a40835.html). I've used them for building my own Wilkinsons for other projects. They also make terminators (one lead instead of two, with the flange being ground) which are nice for building quadrature hybrids using "twisted wire" coax. I've used others from KDI/Triangle too in the past (now Aeroflex, who also took over IFR). http://www.aeroflex-kdi.com/resistor-products/pdfiles/PMS.pdf If you Google some combination of the words stripline, RF, resistors, flange, etc. you can probably find others. If you totally strike out, I might be able to spare one of the flange mount ones from my stock. --- Jeff -------------------------------------------- Jeff DePolo WN3A - [EMAIL PROTECTED] Broadcast and Communications Consultant Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
