Yes, the battery charge units have a big cast aluminum heat sink on the
chassis.
----- Original Message -----
From: "Lee Williams" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Tuesday, April 18, 2006 5:05 PM
Subject: Re: [Repeater-Builder] back-up battery charging
>I will have to check the p/n,but dont think they have the battery
> option. Is there any obvious difference in the appearance of the battery
> specific units? I will also look for the pot to turn these babys down,
> getting tired of cooking batteries....thanks to all,73,Lee
>
> [EMAIL PROTECTED] wrote:
>> If the Micor Power Supplies are either TPN1105A or TPN1106A yes,
>> the outputs are adjustable -
>>
>> If not those model numbers, no, they can't be adjusted for
>> specific battery charging.
>>
>> BTW, there are seven specific Micor Power Supplies by model number.
>>
>> The two mentioned above, TPN1151A, TPN1152A, TPN1110A, TPN1110B
>> and the 12 VDC only version (I don't have the model number handy.)
>>
>> Hope this helps,
>>
>> Neil - WA6KLA
>>
>>
>>
>>
>>
>>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
