Paul, the NHRC-2 uses an opto isolator in the input COR circuit and it
can be a little hard to drive from the GE COS signal. You might try
using the RUS signal as your COR input and see how that goes. If RUS is
not following the COR, you might have to cut a jumper (H-41 to H-42 on
the System Board) to get it to transition with the COR.
Good luck -
73 - Jim W5ZIT
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
