At 4/21/2006 22:15, you wrote:
>I did run 162.2 and 192.8 on a HT90 and it did work with a Micor and M Pro
>receiver on the station end. Newer digital tone decoders will not work
>because the agregate of the two tones will cause the tone to look like the
>sum of the two, but it will excite a decoder reed, or frequency selective
>decoder.
...yet another reason why I prefer those good ol' analog decoders (GE
Channel Guard boards with Versatone chips).
BTW, the primary reason I wrote an MVP repeater conversion article was
because at the time the only instructions available at the time (from
WB6RFW) said the MVP CG boards were "pretty useless after the radio has
been duplexed" and "to get rid of it". I felt it was just plain wrong to
replace a perfectly good CTCSS board with an inferior unit.
For those of you who still choose to follow Mr. Putney's instructions, I
will kindly accept all your discarded MVP CG boards, especially if they
have Versatone chips in them :)
Bob NO6B
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
