Ahhhhh, that's easy to understand! Tx output of 100 uW and Rx sens of 1 V.
Were goin to be loosin a LOT of good info with this gent gone. Vincent N6OA ----- Original Message ----- From: "Harold Farrenkopf" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Sunday, April 23, 2006 8:58 PM Subject: [Repeater-Builder] Re: Good bye! > There must have been a large metallic wall or screen between his 2 > antennas for his repeater to work without degradation with 25' > horizontal separation. Or else he had an amazing radio that > transmitted over 50dB less sideband noise and a front end made like a > crystal filter. > > His loss, not ours. > > Harold, VA3HF > IRLP node 2524 - VE3WHO > > --- In [email protected], Kevin Custer <[EMAIL PROTECTED]> > wrote: >> >> Teton Amateur Radio Repeater Association (TARRA) wrote: >> > I have only belonged to this group for a short time. I'm sure all of >> > you will be glad to know that as of now I no longer belong to this >> > group, a waste of MY time. >> > >> > Mick - W7CAT >> >> <Chuckle> >> >> (some statement about a door and an ass) >> >> [ a waste of WHO'S time?] >> >> {grin} >> >> Kevin Custer >> List Owner, now with one less (desired) member.... >> > > > > > > > > > > Yahoo! Groups Links > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
