|
You can't "upgrade" the codeplug to an older software version.
You have to use software that's the same or later version than
what was last used to program the radio.
Dick
----- Original Message -----
From: Tom
Sent: 23 April, 2006 21:37
Subject: [Repeater-Builder] MSF 5000 CODEPLUG VERSION
ISSUES I'm running into a problem trying to program a Digital Capable version of the MSF 5000, UHF Low split version. I can read the codeplug and modify it but when it comes to re-programming back to the station I get an error that reads something like: "SSCB Firmware is version # /3 The codeplug you are programming is version # 05. Can not program station." The software version I have is 5.21 and the two versions that flash on the station screen are 5.52 & 5.41. I've tried the "upgrade codeplug version" in the RSS but whether it is System version 1,2, or 3 the SSCB/TTRC "current vs. change to" versions are all set for 5. What am I missing and how do I remedy the situation? Thanks. Tom Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ YAHOO! GROUPS LINKS
|
