The F-201G might be a F150 type hybrid ring duplexer variation if my memory serves me again. It might just be easier to make it into a Q202 type duplexer with capacitor loops and 4 pieces of cable.
Sure, the hybrid ring 4 can duplexer gives about 100dB isolation but it doesn't provide much out of band attenuation or mid-band isolation. Allot less cables to make. My 2 cents. Harold --- In [email protected], "skipp025" <[EMAIL PROTECTED]> wrote: > > Can you send me a picture of the duplexer. Chances are > I have the harness you're looking for and will provide you > with the measurements from my harness. I tried looking it > up on the web (picture) without any luck. > cheers, > skipp > skipp025 at yahoo.com > > > "wd0ekr" <wd0ekr@> wrote: > > > > I am going to attempt to build a new harness for a sinclair F-201G > > duplexer for the 144/145 mhz range, I have the CM-106 manual and have > > read the articles on repeater builder. It would make things easier if > > someone who has already done this could tell me what length's they used > > for L1, L8, L2, L7. It seems like I read this information this list > > before but I can not find it now. > > > > 73 > > Jim > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
