I am in need of a simple controller, with which I can hook a repeater to
a link system. With zero programming skills though this has mainly been
a thought or a dream waiting to get done by someone :)
1 radio port and 1 link port;
Both radio and link ports are fullduplex ports, and the linking between
ports need to be three-phase, so that the radio port can be hooked to
link both ways, or only to monitor link traffic or be disconnected from
link.
Controller needs to be steerable with DTMF from both radio and link
ports, with a site prefixed commands through the link port only (to
enable remote command from any of the sites)
Basic repeater functions on the radio port, COR and/or PL access, tail &
talk timers, CWID with timers, multiple courtesy tones to telemetry link
state and other functions.
Commercial controllers do something like this, but at least the site
prefixing is a feature which I haven't seen in the low-end controllers.
I can do this on a Arcom RC-210 but that is bit too much to populate
several sites.
Any recommendations or programming ideas?
..
Erik OH2LAK
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
