> > >I purchased a complete BX-24 development system a couple of years ago & had >no problem uploading my program into the BX-24. I also just downloaded the >downloader from http://www.basicx.com/downloads/bx-setup-210-program.zip, >installed it & compared the files to the ones I used during development; >they're identical. > >Bob NO6B >
Bob, I downloaded the file you indicated above and the update for the RC-110 to ver 4.0 worked like a charm. Thanks a bunch for the correct upload file name. My manual for the RC-110 shows that I needed to download: http://www.basicx.com/beta/bx_setup_210b2.zip This file has the checksum error and is where I have been getting stuck for a year or so. If I had been given the correct file to download I would have been in good shape. Arcom never would respond with the information on which file I should use in place of the one they give in the 110 manual they supplied. I don't find an updated RC-110 manual at the Arcom site either, so I was stuck Thanks again to the group, and to you Bob for the specific info I needed. 73 - Jim W5ZIT Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
