Sorry for sounding obvious, but have you checked the coax, connectors and the antenna for loose or poor connections, if they all check out why not try grounding the tower with an earth spike.
Trevor
M3TPX
IO93HE, UK
IM Ashford <[EMAIL PROTECTED]> wrote:
Has anyone experience with eliminating noise fom the metalwork of a wind up
tower?
Our tower has 4 sections and is of the type where all sections raise at once
with a single cable pulley system.
The Machine is a Nokia BRS150 using a Sinclair Duplexer on 145.7625/1625
Antenna is Jaybeam Folded Dipole with its own RG214 tail into 60 ft of
LDF450.
When you shake the trailer mounted tower there is severe crackling on weak
signals. The three stays have been
tightened up as far as possible.
Any Ideas on how to kill this noise guys?
Ian Ashford
G8PWE
Central England
UK
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Ring'em or ping'em. Make PC-to-phone calls as low as 1ยข/min with Yahoo! Messenger with Voice.
YAHOO! GROUPS LINKS
- Visit your group "Repeater-Builder" on the web.
- To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
- Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
