Alinco almost got it right, at least with the DR599 and possibly the DR600.
The radio can be remote controlled if it has the DTMF decoder option board
via RF.  I think you can also remote control it by applying the remote
control DTMF tones to the mic input without keying the radio (I haven't
tried but I think that's the way the DTMF mic sends commands to the radio).
The only snafu is that they didn't include a provision for setting offset
and the radio doesn't do it automatically.  Now that I've found the book for
mine, it may be time to do a little more investigating.

 

Jamey Wright

Systems Analyst

Morgan County EMCD 911

Decatur, AL

256-552-0911

 

  _____  

From: [email protected]
[mailto:[EMAIL PROTECTED] On Behalf Of DCFluX
Sent: Thursday, November 16, 2006 1:18 PM
To: [email protected]
Subject: Re: [Repeater-Builder] Re: Has anyone interfaced a Yaesu FT-8500 to
be a remote base on a repeater?

 

I would say that depends on when the radio was made. Older Yaesu's,
such as the FT-757 and even the FT-727 had a "CAT" interface which
allows data from a computer to set the operating parameters of the
radio.

Other radios in the Yaseu line, Such as the FT-5100 have a few lines
for the buttons, like band sellect and channel up and down. Which can
allow 'poor mans remote base'.

Others take a serial data stream down the mic jack to do control of
the radio. You would have to get a logic analyzer or digital storage
scope to disect the protocol though.

On 11/16/06, Ken Arck <[EMAIL PROTECTED] <mailto:ah6le%40ah6le.net> net> wrote:
> At 09:18 AM 11/16/2006, you wrote:
> > Send me a
> >schematic of both the FT-8500 and the TM-742A and indicate what
> >repeater controller you desire to interface too.
>
> <---I'm not sure about the 742A but the Yaesu line of mobile radios
> do NOT lend themselves to remote base use *IF* you want them to be
> frequency agile. In other words, you can't remotely program them "on
> the fly" remotely.
>
> To my way of thinking, this severely limits their usefulness as a
> remote base radio.
>
> Ken
> ----------------------------------------------------------
> President and CTO - Arcom Communications
> Makers of the world famous RC210 Repeater Controller and accessories.
> http://www.ah6le. <http://www.ah6le.net/arcom/index.html>
net/arcom/index.html
> Authorized Dealers for Kenwood and Telewave and
> we offer complete repeater packages!
> AH6LE/R - IRLP Node 3000
> http://www.irlp. <http://www.irlp.net> net
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>

 

Reply via email to