Mine also started as a tone remote base although pre-IDA. I had to remove a jumper on the IFAS board to prevent repeat audio muting.
Steve ----- Original Message ----- From: "Bill McLure" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Wednesday, December 20, 2006 5:46 PM Subject: RE: [Repeater-Builder] GE Mastr II Station > Hi Ralph, > > Thanks for the info that's what I have been looking for. My station has the > P58 version of the controller which I believe is Tone Remote/Repeat > controller. The only problem is it has been setup simplex as a tone remote > base. How do I remove receiver muting on this controller and will your mod's > still work with this setup? > > Regards, > > Bill... > > > > -----Original message----- > From: "Ralph Hogan" [EMAIL PROTECTED] > Date: Wed, 20 Dec 2006 16:19:46 -0800 > To: [email protected] > Subject: [Spam] RE: [Repeater-Builder] GE Mastr II Station > >> Hey Bill, >> >> I pull one of the cable connectors (j1203) plugged into the IDA and insert a >> small breakout molex to molex cable to get to the rx & tx audio pathes plus >> PTT to feed up to the ham controller. In this way the internal GE rptr >> controller can be restored to normal and used in a pinch by removing the >> breakout cable. I've documented my version of the GE Master II IDA >> conversion on my website. >> >> http://www.qsl.net/w4xe/rpttech/rpttech21.htm >> >> Includes a schematic/pictorial of the external ham rptr controller wiring, a >> list of IDA connector pinout descriptions and IDA board layout and pot >> locations. >> >> 73's >> Ralph W4XE >> >> >> >> -----Original Message----- >> From: [email protected] >> [mailto:[EMAIL PROTECTED] Behalf Of Bill >> Sent: Tuesday, December 19, 2006 11:24 PM >> To: [email protected] >> Subject: [Repeater-Builder] GE Mastr II Station >> >> >> Hi! >> >> Does anyone have repeater conversion info on the newer style GE Mastr >> II stations with the all in one controller, metering and speaker >> (19B234871). I have a VHF station I wish to convert but I would like >> to keep the local station controls, speaker, mic and metering. >> >> Thanks! >> >> Bill >> N6YMZ >> >> >> >> > > > > > > Yahoo! Groups Links > > > >
