I should add that NBFM is 5 kHz deviation while SNFM is 2.5 kHz. The
receiver bandwidth is more narrow, but the TX the only 'change' is the
deviation. To convert NBFM to SNFM, cut the deviation in half. That's it!
The same applies to CTCSS/CDCSS - those are cut in half, too.

Joe M.

> It's a simple matter of lowering and raising the deviation on the TXs.
>
> In your case, with two repeaters, it's a simple level issue. Set your
> controllers to provide the 'opposite' repeater with enough audio.
>
> It's just like retransmitting Broadcast FM on a NBFM TX. It's no magic
> even though the WFM is 75 kHz deviation and NBFM is 5 kHz. On a speaker or
> line, they are both the same audio level and would both drive the TX the
> same.
>
> Although crossbanding CAP to 155.160 (Public Safety freq) might be an
> issue.
>
> Joe M.
>
>> Scott,
>>
>> The CAP is going from wideband FM to narrowband FM in
>> a few months, We are exploring the Idea of using the old
>> GE master II machine on 155.160 and crossbanding it with
>> the new Motorola quantar Narrowband machine.freq pair for
>> interoperability.
>>
>> The question that comes to mind is how to you convert the
>> audio deviation from wide to narrow and back again, in a
>> cost effective manner.?
>>
>> Any input on this idea would be appreciated
>>
>> John
>> kb3nqs
>>
>>
>>
>>
>>
>>
>>
>>
>> Yahoo! Groups Links
>>
>>
>>
>>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>

Reply via email to