Dave, Thanks. The only reason I am considering changing is that I can put the
70 amp back into my radio room, since the 100 amp is available. I'm going to
try it today and see what it does, see if any noise shows up. As they say, it
can't hurt to try. And that the 100 amp is much lighter than the 70 amp.
Mathew
DaveH <[EMAIL PROTECTED]> wrote:
Hi Mathew,
If the supply you are using is fine why change? Yes, you would gain some
amperage capacity. However, switching supplies are inherently noisy. You
could experience problems from these noises. I realize we are not talking
about HF. But, it is possible to wind up with a problem you don't have now.
If that 50 amp supply is fine, I see no advantage in the change.
Dave
----- Original Message -----
From: "n9lv" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Saturday, January 13, 2007 10:48 AM
Subject: [Repeater-Builder] Switching Power Supply vs. Astron Etc.
> With all the talk about switching power supplies, I asked a question
> but did not really see my answer. Currently I have an Astron 70 Amp
> power supply on the repeater system. I have access to a 100 Amp
> Audiopipe DSPS10012 switching power supply available for the
> repeater. What would be the (dis)advantage of using this power supply
> and release the 70 Amp Astron that is in line currently?
>
> Mathew
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
---------------------------------
Check out the all-new Yahoo! Mail beta - Fire up a more powerful email and get
things done faster.
