Hi again, I take 150.8 to 162 or 162 to 174 MHz receivers and convert them to the 142 to 150.8 MHz band. Look here: http://www.repeater-builder.com/rbtip/sensitronRX.html http://www.repeater-builder.com/rbtip/micorhelicalresearch.html http://www.repeater-builder.com/rbtip/coilinstructions.html
If you don't have a donor VHF receiver (I'm guessing you don't since you have a UHF receiver), I can supply a complete receiver unit properly converted to be an exact clone of the TLDXX72 (142 to 150.8 MHz.) for $125.00 US, plus shipping. I can supply you a good donor K1005 Micor channel element for do-it-yourself re-crystaling, or offer to have it recrystaled and temperature compensated for the going price at ICM or BOMAR. In my opinion, replacing the UHF receiver with a good Micor VHF 2M unit will give you the performance and reliability you are looking for. These are *properly* converted receivers that will work identically to a real (rare) factory 2 meter Micor receiver, not some hack job. Kevin Custer BTW: I also convert 150.8 to 174 Micor preamps to operate in the 2M band: http://www.repeater-builder.com/rbtip/micorpreamp.html gervais fillion wrote: > Kevin > thanks for the response > i am working on converting a big pager transmetter,Motorola Micor 125 watts > SHD ,it receive in UHF and his TX is low split at 140.?? mhz > so by replacing the receiver in uhf i should be able to modify it Kevin for > our project here. > i must say that i am not a tech but i have the Moto Manual with it so with > some help i should be able,,,,i will swap the receiver uit and after will > see what happens :-) > > i had a suggestion to replace the uhf receiver by a Phoenix Vhf and use his > receiver part for my project by since i may find a used receiver at a good > price it could be less problematic to fix it! > > what were the mods that have been done on the other card Kevin? > > > we plan to install this transmetter on a 3000 feets mountains so we need > reliabity and this Micor should do the job > > 73/s Kevin > > Gervais ve2ckn > Bic,quebec > > > gervais fillion wrote: > > hi all > > i am looking for a used Micor receiver his parts number is "TLD 8272B " > > if you have 1 and want to sell it ,let me know your price > > thanks in advance > > > > gervais,ve2ckn > > Would you consider a TLD 8273B that has been properly converted to a TLD > 8272B? > > Kevin Custer
