Sorry to butt into this conversation, but I need a source for these fuses. I have a 2001D monitor, that takes a 1/8a fuse.. Any of you guys able to help? Mike KA4MKG
Eric Lemmon wrote: > > > Ben, > > Both the GEN and the ANT connectors have 1/16 ampere pico fuses behind them, > just in case the technician keys a transmitter while connected to them. It > must happen a lot, since fuses were provided. It takes a 7/16-inch nut > driver to remove the connectors, and the pico-fuse plugs into the back of > the connector. Check the fuses for continuity to ascertain if that's the > problem. Extra fuses were included in a small envelope packed in the > instrument cover storage compartment. Exact replacement fuses are available > from Digi-Key as #F2307-ND at $1.19 each. > > If you need to get back in operation before your replacement fuses arrive, > just switch the GEN and ANT connectors. > > 73, Eric Lemmon WB6FLY > > -----Original Message----- > From: [email protected] > <mailto:Repeater-Builder%40yahoogroups.com> > [mailto:[email protected] > <mailto:Repeater-Builder%40yahoogroups.com>] On Behalf Of w4wsm > Sent: Tuesday, February 06, 2007 6:02 AM > To: [email protected] > <mailto:Repeater-Builder%40yahoogroups.com> > Subject: [Repeater-Builder] Low sens on a 2600 monitor > > Well just found this group so here is another question...last for now > I promise:-) > My 2600 service monitor has lost a lot of its hearing. It's still 100% > on everything else, but it has lost a lot sens. It was just one of > those turn it on and what happened type of thing. > > Any ideas on this one? > > Thanks! > Ben > >
