If i'm not mistaken It was put between the duplexer and  the 
antenna. The site I used i no longer use. The friend still uses his 
site and the dci filter i loaned him is still in line and doing the 
job. I think he also uses it between the duplexer and antenna.

Dennis  no5c

--- In [email protected], "Jim Cicirello" 
<[EMAIL PROTECTED]> wrote:
>
> Dennis,
> 
> I have the same problem also. Did you place the filter between the 
antenna
> and duplexer? I have mine installed between the RX and Duplexer. 
Depending
> the WX I can hear the FM Station on my two meter repeater, but 
thought the
> RF was getting into the cables, etc. I may have to switch the 
location of my
> filter.
> 
>  
> 
> Thanks JIM  KA2AJH
> 
>  
> 
>  
> 
>  
> 
>   _____  
> 
> From: [email protected]
> [mailto:[EMAIL PROTECTED] On Behalf Of 
numberone5call
> Sent: Tuesday, February 13, 2007 9:26 PM
> To: [email protected]
> Subject: [Repeater-Builder] Re: Ok, here's a weird one....
> 
>  
> 
> Ken;
> 
> I can only tell you what worked for myself and a friend w another 
> repeater. Both repeaters were/are located on hi-power FM broadcast 
> towers. Both FM broadcast radio transmissions cud barely be heard 
on 
> the outputs of the repeaters (only when the rptrs were tx'n, under 
> the tx audio). Both cases a dci bandpass filter eliminated the 
> rebroadcast of the FM stations. 
> This are both 2mtr repeaters. 
> Hope this helps!!!
> 
> Dennis no5c
> 146.970 no5c/R pl100hz
> 444.500 w5LRG/R
> Lauderdale Repeater Group w5LRG
> Meridian, MS
> 
> --- In Repeater-Builder@ <mailto:Repeater-Builder%
40yahoogroups.com>
> yahoogroups.com, Ken Arck <ah6le@> wrote:
> >
> > Have a customer with the following issue:
> > 
> > Scenario: Amateur repeater (Mastr II) installed at a 100,000 FM 
> radio 
> > xmtr site.
> > 
> > Issue: Very low level audio of radio station appears on Mastr 
II's 
> > xmtr (yes, external controller). Repeater owner hasn't fully 
> > explained what "very low level" means. But regardless.....
> > 
> > Question: The only way I see this happening is due to some AM 
> > component on radio station's transmitter.
> > 
> > Thoughts?
> > 
> > Ken
> > ----------------------------------------------------------
> -----------
> > President and CTO - Arcom Communications
> > Makers of the world famous RC210 Repeater Controller and 
> accessories.
> > http://www.arcomcon <http://www.arcomcontrollers.com/> 
trollers.com/
> > Authorized Dealers for Kenwood and Telewave and
> > we offer complete repeater packages!
> > AH6LE/R - IRLP Node 3000
> > http://www.irlp. <http://www.irlp.net> net
> >
>


Reply via email to