LBI30768(any version) is missing from the LBI library.
If anyone has a clean paper copy they'd like to
loan for scanning please let us know.
Mike WA6ILQ
co-webmaster at repeater-builder
At 10:43 AM 02/18/07, you wrote:
Jon: The 19D429656G1 circuit board is a line
level compensating board. This board is mounted
on the sheet metal wrap around on the voter
assembly and interconnects to the voter module
by jumper wires. LBI30768A describes the voting
module with the compensating board. Line level
input to the voter can vary between -25 dbm to 0
dbm, while the output level remains at -30 dbm ±
0.75 dbm. You should obtain this LBI before
trying to set up these voter modules.
Fred W5VAY
----- Original Message -----
From: <mailto:[EMAIL PROTECTED]>jon60070
To: <mailto:[email protected]>[email protected]
Sent: Friday, February 16, 2007 7:32 PM
Subject: [Repeater-Builder] ge voter receive modules
Ijust was looking at the receive modiules in the voter i recentely
got and noted that there is no input level adjustment. upon inspection,
i noted there are 2 boards in the module, the normal one as the
schematic shows and the 2 nd one which is not documented (p/n
19d429656g1 ) is this an input agc bd? any ideas?
