Thanks for the reply and suggestion. I'll see what I can learn.
HEB
----- Original Message -----
From: Jim Sheldon
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, March 31, 2007 7:47 PM
Subject: RE: [Repeater-Builder] FS: UHF 4 cavity duplexer DB4076W-A
Unfortunately I don't. You might do a google search on DB Products - they
have been acquired by another company and you might be able to get the info
from them.
Jim
----------------------------------------------------------------------------
From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf
Of Bon & Hal
Sent: Friday, March 30, 2007 8:02 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] FS: UHF 4 cavity duplexer DB4076W-A
Do you have access to a spec sheet with the cable lengths for such a
duplexer? I too have one that I need to get tuned down into the ham band.
Thanks and good luck with the effort to sell.
'73
KA9MXW
----- Original Message -----
From: Jim Sheldon - W0EB
To: Repeater-Builder@yahoogroups.com
Sent: Friday, March 30, 2007 9:29 AM
Subject: [Repeater-Builder] FS: UHF 4 cavity duplexer DB4076W-A
Anyone building a UHF repeater, I have a DB Products DB4076W-A rack
mount duplexer that was just taken out of commercial service. The
repeater was replaced with a new Icom that had a built-in duplexer.
It's a 4 cavity bandpass/band reject duplexer and is listed for 450 to
470. I've seen many of these in amateur service so I'm pretty sure it
can be tuned down to 440 without too much trouble.
This one's in decent shape with only a few scratches and all the
double shielded cavity interconnect cables and connectors are intact.
Asking $300 shipped anywhere in the US.
Anyone interested please contact me off list to [EMAIL PROTECTED]
thanks,
Jim Sheldon - W0EB
Wichita, KS
