Hi Vern, Check out this PDF. http://www.scomcontrollers.com/downloads/adm_schem.pdf
It has 3 pots as you described. Two for Bias Adjust and one for Delay Time. -Sean > > Thank-you Bob, for pointing that out. > > As it turns out, someone else had mentioned that to me as well. > > In this instance, the analog delay module came out of an S-Com 5000 > controller; and the contributor told me what the pinouts were supposed > to be. Although I would prefer to confirm things with proper > schematics, I have made the connecting cable according to the > information he provided. > > By chance would you happen to have a schematic and documentation for > this module? At this point, I do not know what the pots are for; > although I would suspect that one (of the three) is the delay time. > The PCB has "S-COM Audio Delay Module" in the silkscreen on the > componend-side; and "J703021" in the etch on the solder-side. > > Thanks again. > > <<< vern (W6NCT) >>> > > > > >
