Yup... best advice is get the correct manual for the station and get to know both very well.... It will save you and your neighbors a lot of greif.
73 Mike K5JMP www.k5jmp.us -----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] Behalf Of Maire-Radios Sent: Sunday, April 22, 2007 10:05 AM To: [email protected] Subject: Re: [Repeater-Builder] Micor Conversion there is a little more then that. look at the back terminal board and the filters that need to be added to the receive connections. ----- Original Message ----- From: [EMAIL PROTECTED] To: [email protected] Sent: Saturday, April 21, 2007 10:52 PM Subject: [Repeater-Builder] Micor Conversion I am converting a full duplex Micor base station to a repeater. The station was pulled from service on the UHF MED channels and won't repeat but will full duplex. I have looked over repeater-builder.com and am not finding an article describing the procedure. Can I just add the squelch gate and time out timer cards and get it to repeat? Randy
