Hi Art, Have you found the data you were looking for? If not, I might be able to help. I found manuals for both the VHF and UHF Repco receivers and transmitters in the S-COM archives. They're referred to as the RDL series of RF Link Devices, and apparently there were both voice and data versions. We had some of the data-only TX strips years ago, so W0INK designed a pre-emphasis/limiting/filtering circuit to use them for voice operation. The manuals are copies of copies and are a little rough in spots. Mike/ILQ: Interested in posting them on Repeater-Builder? 73, Bob Bob Schmid, WA9FBO, Member S-COM, LLC PO Box 1546 LaPorte CO 80535-1546 970-416-6505 voice 970-419-3222 fax www.scomcontrollers.com In a message dated 4/18/2007 1:57:38 PM Mountain Daylight Time, [EMAIL PROTECTED] writes:
Recently a member posted some info about this 2 watt vhf board being available on Ebay. I obtained 8 of these boards for experimentation. They are marked RD*3HT**X date of 2-83 and appear new and unused. Indicated tested at 154.570 (no crystal installed). Wondering if anyone might have some documetation or scematic or pinout that might help in putting this board into an amateur radio project. Would gladly share experience with this board with anyone. The board is high quality and may be ideal in a small size vhf project. Thanks in advance. Can contact off list at [EMAIL PROTECTED] (mailto:[EMAIL PROTECTED]) . Art Carlson ************************************** See what's free at http://www.aol.com.
