Dave, I wasn't able to google 'radioprogramming2' with any success. Could you send a copy of the MVS software to
[EMAIL PROTECTED] Thanks, Jack - N7OO ----- Original Message ----- From: Dave Cochran To: [email protected] Sent: Friday, May 25, 2007 7:28 AM Subject: Re: [Repeater-Builder] GE Programming Software for Amateur Use available online? The Software for the MVS can be found in the files section of the yahoo group called RadioProgramming2, if you have any trouble locating is just holler and I'll shoot you a copy of it. Dave N0TRQ -- Every electronic device is manufactured with smoke stored deep inside... only a true genius can find a way to set it free. On 5/24/07, Jim <[EMAIL PROTECTED]> wrote: skipp025 wrote: > Is there any of the older GE radio software available online? > > MVS or MPA radios > > A ham friend wants to try and use these radios and I have little or > no GE Radio Software. For MPA's it matters a bit which logic board they have, and which flash is in them (although that can be changed easy.) The best board is the 19D903081G(n) (called the '081 board), which can be flashed to EDACS/conventional or conventional only, and can accept the AEGIS digital board. This can be programmed with EDACS-4 (windows-based), EDACS-1, (DOS), or MPA CONV with the conventional only flash. Another is the '628 board, which is EDACS/conventional only, and does not accept digital boards. This can only be programmed with EDACS-1 I believe. There is also an older board that is unflashable, and is conventional only, but I don't remember the number right off. And it only programs with MPA CONV. -- Jim Barbour WD8CHL -- -- Every electronic device is manufactured with smoke stored deep inside... only a true genius can find a way to set it free. ------------------------------------------------------------------------------ No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.472 / Virus Database: 269.8.1/822 - Release Date: 5/28/2007 11:40 AM
