> Sorry for the confusion... Maybe I wasn't very clear on my post. First > of all, my Micor is a repeater station, unified chassis. > > > I performed this mod: > > SNIP > > > > SO NO, the exciter itself is not on until the repeater is keyed up.. > I have a bird & dummy load on the exciter (no PA) and I have about 2.5 > Watts out when the repeater is keyed up. BUT with the mod in place, I > have no power out to the bird, but do have a signal
Then the mod has not been performed correctly. The mod provides a switched ground to the channel element enable pin when the PTT is keyed. Kevin ________________________________________________________________ Message sent using Telaen Webmail 1.1.2
