Trunking Micor 800 MHz PA. Power levels started at 35 watts up to 75 watts. If you are interested, give me a few days and I should be able to find a complete manual.
Milt N3LTQ ----- Original Message ----- From: Mike Morris To: Repeater-Builder@yahoogroups.com Sent: Sunday, June 03, 2007 7:50 PM Subject: Re: [Repeater-Builder] HELP - Photo collection: Name this PA ! ARRG. Thanks Chuck... I'm waaaay too used to FTP where it's (servername)/repeater-builder/wa6ilq/name-that-pa Folks, try this: < http://www.repeater-builder.com/wa6ilq/name-that-pa> Mike WA6ILQ At 04:03 PM 06/03/07, you wrote: You forgot the ".com" in the URL. All I can say is it's Motorola. Chuck WB2EDV ----- Original Message ----- From: Mike Morris WA6ILQ To: Repeater-Builder@yahoogroups.com Sent: Sunday, June 03, 2007 6:41 PM Subject: [Repeater-Builder] HELP - Photo collection: Name this PA ! In past postings and articles on repeater-builder I've referred to "locals" and "local systems"... one of the locals that has helped me on an article or two emailed me with a question and some pictures... Can anyone help identify this amplifier? See the 9 photos at < http://www.repeater-builder/wa6ilq/name-that-pa> Each one is about 460-480KB each The first one may be all someone has to look at. Thanks in advance... Mike WA6ILQ At 08:08 PM 06/02/07, you wrote: I have a PA I acquired but have no idea what it is. It's 19" rack mount and about 4 rack units high. It uses N connectors for RF in/Out Stamped on the heat sink is 64E82631N02 F The input is TRN8852A uses a M9875 device Next stage is a TRN8853A uses a M9876 device Next stage is a TRN5268 Goes through a directional coupler? TRN8856A Then it goes to another combiner, I'm sure it has a fancy name, the board number is 84D82462N01 Then it combines 2 modules, one is another TRN5268B the other is a TRN4939 Then a circulator? 42B82633N01-A Then through a filter? Then out the N connector. Can you tell anything by this info? Looking for band, and power levels of the various stages. Knowing what Moto book it is covered in would be a blessing... Thanks in advance.
