Those should be configurable under RSS.. I used to run an M130 for my APRS station.
You may need to specify an outboard option under RSS for those option to light up. jwpauler wrote: > > > > Good Afternoon everyone... > > I have two Motorola Radius M120 mobile radios, each listing a model > number of M44GMC20A3AA. As far as I can tell (from looking at the > front and what's in RSS) these are two channel units, have the 40W > P.A. and include the 16-pin accessory connector. > > These units are going to be interfaced to a repeater controller for > use as a portable repeater, but I'm having a heck of a time finding > the correct pinout of the accessory connector. All of the diagrams > I've found so far refer to a "8-channel" or "16-channel" Radius and > while those diagrams get me close, some parts are missing. > > For example, I'm finding COR/COS on the first top and bottom pin on > the far right side (I think that's 15 and 16), but no diagram anywhere > lists COS at that point. I have checked to see if there is any > customization option from within the RSS (like the GM300's) and there > isn't. > > Right now I have the following working: TX AUDIO, PTT, TX GND, RX GND > > I'm trying to find/confirm: RX AUDIO, COR/COS > > Can anyone help? > > Justin > > -- Jay Urish CCNA Network Engineer Home)972-691-0125 Cell)972-965-6229
