The only schematics I have seen are for connecting multiple TNC's to 
the serial port on a computer using diodes on the data lines.

If anyone happens across a schematic (That work) for connecting 
multiple TNC's to a radio, I would also be interested.

Dan
KA8YPY


On Aug 2, 2007, at 9:26 AM, Duane Hall wrote:

>  I remember seeing the schematics you are talking about, they were 
> over on www.packetradio.com. I cant find them now, but they are 
> probably there somewhere.
>
>  Duane
>  AB8QU
>
>  Dave Novotny wrote:Hi Eric,
>>
>> I'm not too worried about lots of packets perhaps
>> interfering/colliding with each other.  I have a couple of repeater
>> sites with two controllers.  I want to have remote control of each
>> controller.  I don't want to share the RS-232 side.  I'd much rather
>> share the RF side.  The circuit was pretty simple.  It used diodes
>> on the PTT for isolation and resistors to mix the TX audio.  I'm not
>> sure if there was any other control or not.
>>
>> Dave
>> --- In [email protected], "Eric Lemmon" <[EMAIL PROTECTED]>
>> wrote:
>>
>>> Dave,
>>>
>>> I'd like to see that article, too.  Connecting two TNCs to one
>>>
>> radio is
>>
>>> easy, but allocating the RX and TX functions between two devices
>>>
>> is hardly a
>>
>>> trivial matter.  Unless a buffer is used to store outbound data
>>>
>> while the
>>
>>> radio is busy receiving data on the other TNC, collisions will
>>>
>> occur
>>
>>> regularly.  This should be interesting!  Is this a good idea?
>>>
>>> 73, Eric Lemmon WB6FLY
>>>
>>>
>>> -----Original Message-----
>>> From: [email protected]
>>> [mailto:[EMAIL PROTECTED] On Behalf Of
>>> [EMAIL PROTECTED]
>>> Sent: Wednesday, August 01, 2007 4:51 PM
>>> To: [email protected]
>>> Subject: [Repeater-Builder] Connecting Multiple TNCs
>>>
>>> Hi all
>>>
>>> Some time ago, I saw an article on how to connect two TNCs to a
>>>
>> single
>>
>>> radio.  Does anyone remember such an article an either have a copy
>>>
>> or point
>>
>>> me to a site where I can download it?
>>>
>>>
>>>
>>> Thanks,
>>>
>>> Dave, WA6IFI
>>>
>>>
>>
>>
>>
>>
>>
>>
>> Yahoo! Groups Links
>>
>>
>>
>>
>>
>>
>  
>  

Reply via email to