James,

   Greetings.  It sounds like you have found a solution.  I write 
because I just saw your June post and have an R1 VHF Quantar and need 
to swap to Range 2 for a fire department frequency change (153.xxx to 
159.xxx).  If you were still interested in swapping receivers and 
exciters, we'd love to chat.  Thanks.  If not, tell me more about how 
the specs turned out on your project.    
     
-- Jeff  

--- In [email protected], "James Delancy" 
<[EMAIL PROTECTED]> wrote:
>
> I upgraded the old codeplug version to 13 (I do not like the v14 
windows
> based crap ... so I won't go there).  When I put the frequency in, 
it just
> warned me to correct it (and I answered no).  Then I went through 
all the
> tuning procedures and it tuned up great!  The good surprise was 
when it
> decided that it could do Astro CAI with no problem :)
> 
> ALWAYS ARCHIVE EVERYTHING AT EVERY STEP! Just in case it takes a 
turn for
> the worse!
> 
> 
> James
> 
> 
> 
> 
> On 6/22/07, Bob M. <[EMAIL PROTECTED]> wrote:
> >
> >   So what did you have to do to it? Did the RSS have any
> > restrictions on the frequency entry?
> >
> > Bob M.
> > ======
> >
> > --- James Delancy <[EMAIL PROTECTED] <ctradio%40gmail.com>> wrote:
> >
> > > Just an update. The range 2 exciter and receiver
> > > tuned just fine on the 146
> > > frequency. I have tuned many of these in band, and
> > > this is my first out of
> > > band attempt. I was able to get full transmit power
> > > out with no effort (125
> > > Watts), modulation compensation, deviation
> > > calibration, etc all went fine.
> > > I tuned up the receiver and got -122 dBm (not bad
> > > for nearly 4 meg out of
> > > spec!). I did not have to bypass the existing
> > > preselector. So .. with
> > > that, the unit is still in range 2 configuration,
> > > with the amateur band
> > > channels in it. (Now it will be a mixed mode
> > > repeater when I figure out
> > > the logistics of implementation into the system).
> > >
> > > James
> > >
> > > Milt wrote:
> > >
> > > Unfortunatly you will need to swap out the range
> > > 2 exciter and receiver
> > > for
> > > range 1 units.
> > >
> > > Milt
> > > N3LTQ
> >
> > __________________________________________________________
> > Take the Internet to Go: Yahoo!Go puts the Internet in your 
pocket: mail,
> > news, photos & more.
> > http://mobile.yahoo.com/go?refer=1GNXIC
> >
> >  
> >
>


Reply via email to